Ossur Total Knee 2000 User Manual

Instructions for Use
TOTAL KNEE
®
2000
Geometric Locking System

Ossur Total Knee 2000 Specifications

General

Brand	Ossur
Model	Total Knee 2000
Category	Health Care Products
Language	English

Summary

ALIGNMENT AND ADJUSTMENT (Figure 2)

BENCH ALIGNMENT (Figure 2)

Step-by-step guide for prosthetic alignment and adjustment performed on a workbench.

STATIC ALIGNMENT

Procedures for static alignment checks with the patient standing between parallel bars.

DYNAMIC ALIGNMENT

Guidelines for dynamic alignment adjustments during patient ambulation and cadence changes.

HEEL RISE / INITIAL FLEXION – VALVE H (Figure 9 & 10)

Bumper adjustment

Guidance on selecting and adjusting the appropriate bumper based on patient weight and desired stance flexion.

Shim adjustment (Figure 7)

Details how adding or removing shims affects the geometric lock release point and knee stability.

INSTALLATION (Figure 10)

FOLLOW-UP CHECK

Recommendations for re-assessing and adjusting the prosthetic knee component after initial use.

COSMETIC OPTIONS (Figure 11 & 12)

Discusses options for cosmetic coverings that do not interfere with the knee's functionality.

MAINTENANCE

CLEANING

Instructions on how to clean the prosthetic knee using specific cleaning agents and methods.

LUBRICATION (Figure 13)

Details the procedure for lubricating the roller bearings of the prosthetic knee for optimal performance.

PRODUCT-SPECIFIC TRAINING

Emphasizes the importance of specialized training for users and clinicians for successful rehabilitation.

LEVEL GROUND WALKING

Guidance on teaching patients to walk on level ground, focusing on stance flexion and hip extension.

SITTING DOWN

STAIR DESCENT

Instructions and precautions for descending stairs using the prosthetic knee, requiring practice and caution.

MANUAL FLEXION

Describes how to manually flex the prosthetic knee when in a seated position, with caution advised.

LIABILITY

Manufacturer's disclaimer regarding intended use, maintenance, and unauthorized component combinations.

COMPLIANCE

Details the testing standards and recommended safety checks for the prosthetic knee component.