Ossur Total Knee 2000 - ALIGNMENT AND ADJUSTMENT (Figure 2)

6
ENGLISH
NUMBERING IN FIGURES
. Alignment reference line
. Socket
. Knee centre reference
. Front link
. Balance unit
. Pivot axis (alignment axis)
. Hydraulic housing
. Back link
. Bottom link
. Chassis
. Bumper
. Shim
. Bumper cover
. Extension promoter
. Valve F (Flexion)
. Valve H (Heel Rise / Initial Flexion)
. Valve E (Extension)
. Spring cup
. Spring
. Ferrule
. Cable
. Retaining Ring
. Spring cup seat
. Knee cap – small
. Knee cap – large
. Shin ferrule
. Bearings (lubrication points)
. Release points
FUNCTIONS AND BENEFITS
• Increased knee stability and cadence variation.
• Increased toe clearance in swing phase.
• Lightweight design – slim profile for enhanced cosmetic finish.
• ° knee flexion – suitable for sitting, kneeling, cycling and other
activities where greater knee flexion is desired.
• -month warranty.
INDICATIONS FOR USE
• Adult amputee up to kg (lbs) patient weight.
• The Total Knee is exclusively used for lower limb prosthetic fittings.
• Suitable for an unlimited community ambulator who has potential to
walk with varying cadence.
CLEARANCE Figure 
ALIGNMENT AND ADJUSTMENT Figure 
ADAPTER OPTIONS (Figure 
• Prong adapter (A- or A-) for knee disarticulation or long
transfemoral residual limbs.
• Female pyramid () for medium to short transfemoral residual
limbs.