Oster BVSTEM8100-013 - Preparing Cappuccino; Preparing Hot Water; Daily Cleaning of the Appliance

English-15
Preparing Cappuccino
Assemble the automatic milk froth system as described in Preparing Cappuccino or Latte
section.
1. Fill the milk container with milk and close the lid.
2. Place a cup under the spout.
3. Switch on and press Cappuccino button. The indicator keeps on during preparation
process.
4. The espresso maker dispenses milk rst and then coffee.
5. Preparation will stop automatically. If you want to stop, press the button again during
the operation.
6. Remove milk container from espresso maker and put it in the fridge.
7. After use, see section “Daily Cleaning of the appliance”, for cleaning the
automatic milk dispensing system.
IMPORTANT:
• Steam and hot milk may spray out of the spout when starting the frothing.
• Place the connection milk tube around the milk container lid after use. Do not let it fall
freely to prevent milk spray out caused by pressure difference.
Preparing Hot water
1. Put a cup under the spout.
2. Press Hot water button
!
!
!
. The indicator keeps on during preparation process.
DAILY CLEANING OF THE APPLIANCE
Timely cleaning and maintenance of the appliance is very important to prolong the life of
the appliance.