English-17
2. Remove the service door.
3. Press the release knob.
4. Remove the brewer and rinse it with fresh water.
5. Place the brewer and the service door in their original position.
Helpful Tips: When
!
lights up stably, it indicates that the brewer is missing or is
installed improperly. When
!
is ashing, it indicates that the service door is missing or
is installed improperly.
Note: When
!
is ashing, the coffee grounds container is missing
Cleaning the water tank
1. Lift the water tank out of the espresso maker and change to rinse with fresh water.
2. Fill it with drinkable water up to the MAX level indication and place it back in the
espresso maker.
To Next Page
Loading...
