SENSOR COOK
The sensor features detect the increasing humidity released during cooking. The oven automatically adjusts the cooking
time to various types and amounts of food.
Suppose you want to cook potatoes:
1. Place the food in the oven and close the door, press POTATO pad, the oven starts detecting immediately. (Two beeps
will sound to signal error operation if door is opened.)
2. Error may occur to the system sensor or else, in this case, the system will stop automatically with the display showing
E-5, beeps sound until STOP/CANCEL is pressed.
3. When steam is sensed, corresponding cooking time appears on display and begins counting down. You can press
MORE or LESS to adjust the cooking time (the maximum cooking time you can set is 99 minutes 59 seconds). Turn or
stir food if necessary.
SENSOR COOKING CHART
1. During cooking process, you may touch the MORE or LESS
pad to extend or shorten the cooking time (each touch for 10
seconds).
2. If you open the oven door or press STOP/CANCEL during
cooking, the system returns to standby mode immediately.
3. Do not use the sensor features twice in succession on the
same food portion— it may result in severely overcooked or burnt
food. If food is undercooked after the countdown, use time cooking
for additional cooking time.
4. For Beverage, press BEVERAGE and then number pad 1 or
2 to select number of servings.
SPECIAL FEATURE
AUTO REMINDER
After a cooking or a defrost program, beeps sound and END appears in display. Touch STOP/CANCEL pad or open oven
door to clear END before starting another cooking function.
ADD COOKING TIME
In standby mode, you can press START/+30 SEC. to cook for 30 seconds at 100% power level. During cooking, you can
also add the cooking time by pressing START/+30 SEC. to add 30 sec each time (the maximum cooking time you can set is
99 minutes and 59 seconds).
OPERATION INSTRUCTIONS (continued)
To Next Page
Loading...
