[12] STOP Button This button is used to stop tape motion.
❑ Exiting Record Mode: Press this button to exit Record mode and stop
the tape.
❑ Loading: Press this button when slack is present in the tape path (after
unloading or when threading the tape) to activate the servos. The STOP
button illuminates.
[13] Rewind (RWD) Button This button is used to wind the tape from Take-up reel to Supply reel at Fast
Wind speed (Rewind).
[14] Fast Forward (F.FWD) Button This button is used to wind the tape from Supply reel to Take-up reel at Fast
Wind speed (Fast Forward).
Section 3 Controls and Indicators
3 - 4
October 1990
MTR-90III Operation and Maintenance Manual
To Next Page
Loading...
