Need help?Do you have a question about the OTC 3109N and is the answer not in the manual?
General| Type | Handheld |
|---|---|
| Protocols | USB |
| Display | LCD |
| Interface | OBD II |
| Scanning Technology | Diagnostic |
| Operating Voltage | 12V |
Defines WARNING and NOTICE signal words for hazard communication.
Lists critical safety practices for tool operation and vehicle interaction.
Specifies the necessary system specifications for the CD software.
Details how to perform tool updates using the Scanning Suite application.
Identifies and describes the physical components and interface elements of the diagnostic tool.
Explains the meaning of various icons displayed on the tool's screen.
Provides step-by-step instructions for physically connecting the diagnostic tool to a vehicle.
Explains how to navigate and select functions within the diagnostic menu.
Details the process and types of diagnostic trouble codes (Confirmed, Pending, Permanent).
Describes the method for identifying and selecting the vehicle model for compatibility.
Details the procedure and capabilities for clearing diagnostic trouble codes from the vehicle's system.
Clarifies the meaning of the Malfunction Indicator Lamp (MIL) status on the vehicle.
Introduces the Inspection/Maintenance (I/M) monitors and their readiness status for emissions testing.
Lists the specific I/M monitors the tool supports and provides context for their readings.
Explains real-time monitoring of vehicle emissions system operations.
Describes how to access snapshot data recorded at the time a Diagnostic Trouble Code was generated.
Details how to obtain VIN, calibration IDs, and other vehicle-specific data.
Outlines the various settings that can be adjusted for the tool's display and operation.
Explains how to enable or disable scrolling of full Parameter ID names for clarity.
Details how to perform a basic status check of the vehicle's On-Board Diagnostics system.
Describes how to view real-time PID data transmitted from the vehicle's computer module.
Provides definitions and descriptions for various PIDs supported by the tool for data analysis.
Explains how to retrieve and interpret results from O2 sensor monitor tests.
Describes accessing test results for emission-related components not continuously monitored.
Explains the tool's capability to control and test specific vehicle components or systems.
Provides a list of acronyms and abbreviations used within the scan tool interface.
Describes the function to locate vehicle-specific components based on stored data.
Outlines the procedure for installing software and firmware updates for the diagnostic tool.
Offers solutions for common problems such as link errors and MIL illumination issues.
States the product's compliance with European RoHS and EMC directives.
Provides instructions for the proper end-of-life disposal of the product.
To Next Page
