12
|
Quick Start Guide English
575862 Rev B | 03.2016
Bosch Automotive Service Solutions Inc.
Function Menu Description
Fuel Con-
sumption
(MPG/KPL)
Special Functions This function will calculate your fuel
mileage for the current trip in real
time. It is only supported on vehi-
cles equipped with a Mass Air flow
Sensor (MAF). Results may differ
slightly from actual calculations
derived from dividing miles driven
by fuel added.
Global OBDII
Functions
Special Functions Menu selection that provides a list
of Global OBDII Functions such as
I/M Monitors and O2 Monitor Tests.
I/M Monitors Global OBDII
Functions
Displays a snapshot of the state of
the vehicle’s OBD II Monitors.
Keypad Test System Setup Verifies that the keys are working
correctly.
KOEO Injector
Buzz
On Demand Tests This function is supported on Ford
Diesel engines. This test determines
if the injector circuits and solenoids
are operating correctly and without
faults.
KOEO On
Demand
On Demand Tests This function executes the Ford Key
On Engine Off Self Test. It tests the
inputs, outputs, and sensor ranges
while the engine is off. Any faults
will be displayed as DTCs.
To Next Page
Loading...
