Quick Start Guide | 13English
575862 Rev B | 03.2016
Bosch Automotive Service Solutions Inc.
Function Menu Description
KOEO Output
State
On Demand Tests This function tests output devices
such as actuators, solenoids, and
relays controlled by the powert rain
computer module. This test will
toggle the devices ON / OFF and a
voltmeter can be used to verily the
signal is actually reaching the out-
put device.
KOER Cylinder
Contribution
On Demand Tests This function is supported on Ford
Diesel engines. This test determines
that all cylinders are contributing
equally to engine performance.
KOER Glow
Plug
On Demand Tests This function is supported on Ford
Diesel engines. This test activates
the glow plug relay and detects any
difference in the amount of current
between both banks of glow plugs.
DTCs returned from this test indi-
cate which bank has failed glow
plugs or failed wiring.
KOER On
Demand
On Demand Tests This function executes the Ford Key
On Engine Running Self Test. It tests
the inputs, outputs, and sensor
ranges while the engine is running.
Any faults will be displayed as DTCs.
Language
Setup
System Setup Allows the user to change the lan-
guage used by the tool. English is
the default.
To Next Page
Loading...
