OTC OTC3208 - Data Viewing and System Setup; Viewing Freeze Frame Data; Vehicle Identification Number (VIN); System Setup Options

|
OTC3208
|
Operating instructions | 9
en
575512 REV A | 05.2015Bosch Automotive Service Solutions Inc.
 Since DTCs Cleared - shows
status of the monitors since
the DTCs were last erased.
 This Drive Cycle - shows
status of monitors since the
start of the current drive
cycle. Refer to the vehicle
service manual for more
detailed information on
emission-related monitors
and their status.
9 Some vehicles do not sup-
port This Drive Cycle. If
vehicle supports both types
of monitors the I / M Monitors
Menu displays.
View Freeze Data
Displays a snapshot of operat-
ing conditions at the time the
Diagnostic Trouble Code was
created.SeePIDDenitionsfor
more information.
VIN
TheVINfunctionallowsthe
tool to request the vehicle’s
VINnumber.
TheVINfunctionappliesto
model year 2000 and newer OBD
II compliant vehicles.
System Setup
System Setup allows:
• Display contrast to
be changed
• Tool information to be viewed
• Display to be checked
• Operation of the keypad to
be checked
• Memory of the Tool to
be checked
• Units of measure to
be changed
View Data
TheViewDatafunctionallows
real time viewing of the vehicle’s
computer module’s PID data.
As the computer monitors the
vehicle, information is simultane-
ously transmitted to the Tool.
ViewDataallowsthefollowing
items to be viewed on the Tool:
 Sensor data
 Operation of switches
 Operation of solenoids
 Operation of relays
Multiple PIDs may be sent if vehi-
cle is equipped with more than
one computer module (for exam-
ple a powertrain control mod-
ule [PCM] and a transmission
control module [TCM]. The Tool
identiesthembytheiriden-
ticationnames(ID)assigned
by manufacturer (i.e. $10 or
$1A).SeePIDDenitionsfor
more information.