oticon ConnectClip Teachers Guide

Summary
When indicator lights are MAGENTA and GREEN ConnectClip is sending your voice to your
student’s hearing aids. If indicator lights are YELLOW and GREEN (or BLUE and GREEN )
your voice is NOT being sent to your student’s hearing aids
Power indicator Description
•
Steady green Power on
Fading green Charging complete (ConnectClip on)
Blinking green Charging (ConnectClip on)
Blinking orange Charging (ConnectClip off)
•
Steady orange Charging complete (ConnectClip off)
•
Steady red Battery low
Status indicator Description
Blinking yellow Searching for hearing aids
•
Steady yellow Connected to hearing aids
•
Steady blue Connected to hearing aids AND a mobile phone
Blinking magenta Microphone reconnecting
•
Steady magenta Microphone mode
• •
• • • •
ConnectClip
Teacher’s guide to the wireless microphone
Power indicator
Status indicator
Multi-button
Volume down
Rotating clip
MicrophoneCharging socket
Volume up
• Press the multi-button in the centre for 3 seconds, until
the power indicator on the right shows steady green
• When the status indicator on the left shows steady yellow or blue,
ConnectClip is paired with the hearing aids
• Press the multi-button for 3 seconds, until the status indicator
shows steady magenta
• To MUTE the ConnectClip microphone, press the multi-button for
3 seconds. The status indicator changes to steady yellow or blue
• To UNMUTE, press the multi-button for 3 seconds, until the status
indicator shows steady magenta again
• Turn ConnectClip off by pressing the multi-button for 6 seconds,
until both the power indicator and the status indicator are off
By wearing the ConnectClip microphone, you will be sending your
voice directly to your student’s hearing aids. The student is able
to use ConnectClip for other purposes such as connecting to the
phone and streaming music.
ConnectClip has two indicator lights: A status indicator which,
when the microphone mode is ON, should be magenta and
a power indicator which should always be green.
To be able to switch to the microphone mode, ConnectClip
must be paired with and in range of the hearing aids
(20 metres or 65 feet).
4
Power
off
3
Mute/
Unmute
2
Microphone
mode
1
Power
on
MUTE UNMUTE

oticon ConnectClip Specifications

General

Compatibility	Compatible with Oticon hearing aids with Bluetooth
Microphone	Yes
Charging Time	3 hours (full charge)
Weight	Approximately 27 grams
Remote Control	Yes, can control hearing aid volume and program settings
Streaming	Yes
Battery Life	Up to 20 hours of streaming