oticon More - ConnectLine Phone Adapter 2.0

ConnectLine
Phone Adapter 2.0
The Oticon ConnectLine Phone
Adapter 2.0 is an interface
between a conventional
landline phone installation
and the Oticon Streamer Pro
or the Oticon ConnectClip*, in
effect turning a pair of Oticon
hearing instruments into a
wireless headset.
As part of the ConnectLine
system, the Phone Adapter
works seamlessly and
simultaneously with other
ConnectLine solutions such
as mobile phones, TV and the
ConnectLine Microphone.
A fully integrated system
With ConnectLine the user is in control
of the system, not the other way around.
Advanced features such as AutoPriority
and AutoConnect ensure that the user
can hear and answer a phone call while
watching TV.
Landline home phone
Phone Adapter 2.0 is installed in parallel
to an existing landline home phone
installation.
Once a user is in range of the Phone
Adapter, the ConnectClip is automatically
connected and ready to receive calls
(AutoConnect).
From the ConnectClip, the call is answered
by briey pressing the multi‑button.
AutoPriority
If a user is listening to the TV using the
ConnectLine TV solution (or other audio
sources), the AutoPriority feature ensures
that an incoming call is notied.
AutoResume
Once the call is ended the ConnectClip
automatically resumes to its previous
state for example, back to the TV input if
a call was taken while watching TV.
Technical Data Sheet
Wireless accessories
* Both Oticon Streamer Pro and ConnectClip can
be paired with the Phone Adapter, but they
will not work simultaneously. It is therefore
recommended only to pair one at a time.
Technical data
Model BS‑H200
Compatibility Streamer Pro 1.4 and later, and ConnectClip 1.0 and later
Dimensions 124 x 80 x 21 mm; weight 100 g.
System features
AutoConnect: Will automatically connect to the Streamer Pro or ConnectClip
when in range.
AutoPriority: Incoming calls will be prioritized over e.g. TV sound.
Proximity pairing: The phone adapter will automatically pair to the Streamer Pro
or ConnectClip if the Streamer Pro or ConnectClip is in pairing mode.
Range Up to 30 meters /98 ft. with Streamer Pro or ConnectClip (free line of sight)
Connections
Phone line in/out for interface to analog landline home phone
(PSTN) (RJ11/RJ11)
ConnectLine in/out for direct interface to e.g. computer
1
Power consumption Max. 190 mA (using the included power supply)
Headset in Max 6dBmV(RMS), 10 KΩ
Headset out ‑15 — ‑10dBmV(RMS), 10 ‑100 Ω
Audio Bandwidth License free 2.4 GHz (ISM band)
AutoConnect (range) Yes (30 meters/98 ft.)
Audio Quality Mono / 8 kHz sample frq
Frequency 80 Hz ‑ 3.5 kHz (wireless)
Operating temperature 10 to 40°C / 50 to 104°F
Storage temperature ‑20 to 70 °C / ‑4 to 158°F
Emissions Max. 39 dBμV/m @ 3 meters. In compliance with all relevant standards
Power Supply
ConnectLine in/out Phone line in/outPower indicator Status
Included
• RJ11 – RJ11 cable for connection to
landline home phone
• Power supply
• Instructions for use
References:
1. A Computer interface cable is included with Streamer Pro and ConnectClip. Also available as an accessory.
6564