22 23
About Start up Handling Options Warnings Tinnitus Additionals
Clean the mold
The mold should be cleaned
regularly. Use a soft cloth to
clean the surface of the mold.
Use the MultiTool wire loop
to clean the opening.
Replace the tube
The tubing between the mold
and the instrument should be
replaced when it becomes
yellow or sti. Consult your
Hearing Care Professional in
relation to this.
Wash the mold
Make sure you are
able to identify which
mold is for which
instrument before
disconnecting them
from the instruments.
Disconnect the tube
and mold from the
hook. Hold the hook
rmly, when pulling
o the tube. Other-
wise the instrument
may be damaged.
Wash the mold
and tube using mild
soap. Rinse and dry
completely before
reconnecting to the
hearing instrument.
Step 1
Step 2 Step 3
To Next Page
Loading...
