83
Description of symbols and abbreviations used in this booklet
Warnings
Text marked with a warning symbol must be read before using the device.
Manufacturer
The device is produced by the manufacturer whose name and address are stated next
to the symbol. Indicates the medical device manufacturer, as dened in EU Regulation
2017/745.
CE mark
The device complies with all required EU regulations and directives. The four digit
number indicates the identication of the notied body.
Electronic waste (WEEE)
Recycle hearing aids, accessories or batteries according to local regulations.
Hearing aid users can also return electronic waste to their hearing care professional for
disposal. Electronic equipment covered by Directive 2012/19/EU on waste and electrical
equipment (WEEE).
Regulatory Compliance Mark (RCM)
The device complies with electrical safety, EMC and radio spectrum requirements for
devices supplied to the Australian or New Zealand markets.
IP code
Class of protection against harmful ingress of water and particulate matter according to
EN 60529. IP6X indicates total dust protection. IPX8 indicates the protection against the
eects of continuous immersion in water.
Bluetooth logo
Registered trademark of Bluetooth SIG, Inc. where any use of such requires a license.
To Next Page
Loading...
Need help?
General
