EasyManua.ls Logo

Ouellet CMD12KCHVS-I - Installation Location Selection

Ouellet CMD12KCHVS-I
34 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
6
• The appliance shall be installed in accordance with national wiring regulations.
• Installation must be performed in accordance with the requirement of NEC and CEC by a qualified
person only.
• The heat pump is a first class electric appliance. It must be properly grounded with specialized groun-
ding device by a qualified person. Please make sure it is always properly grounded, otherwise it may
cause electric shock.
• The yellow-green wire in the appliance is the grounding wire, which can’t be used for other purposes.
• The grounding resistance should comply with national electric safety regulations.
• All wires of indoor unit and outdoor unit should be connected by a qualified person.
• If the length of power connection wire is insufficient, please contact the dealer for a new one. Do not
extend the wire yourself.
• After the electrical installation, take an electric leakage test.
WARNING
Location
• If you need to relocate the appliance to another place, only a qualified person can perform the work.
Otherwise, it may cause personal injury or damage.
• Select a location which is out of reach for children and far away from animals or plants. If it is unavoi-
dable, please add a fence around the outdoor unit for safety purpose.
• The location should be able to withstand the weight of the unit. Otherwise, the unit will fall and it may
cause injury or death.
• Instructions for installation and use of this product are provided by the manufacturer.