Outback Spectrum - Hood and Body Attachment

Assembly Instructions
a: Lay trolley assembly
on its back, and insert
M6x145 bolt
F
through
guide holes on top
of each leg and body
spacers
E
.
Lay the hood and body
assembly
1
on its back,
and slide in position
between legs.
CAUTION! Care must
be taken to ensure
the hood does not fall
open unexpectedly
or becomes damaged
when it is set on the
ground.
b: Fix the hood and
body assembly onto
trolley assembly by
screwing the bolts into
barbecue body tightly.
Step 5
b:
a:
12
1
F
E
F
E