USER’S MANUAL FOR MAINTENANCE, CONTROL & INSTALLATION OF THE
“OUTLINE GTO ARRAY” – Translation of the original instructions
Page 7/31
2.5 Unforeseen use
The foreseen method of use is the only one allowed by Outline s.r.l. and it is
forbidden to use the rigging accessory for applications other than those for which it was
designed: suspending/flying the specific loudspeaker enclosures.
Any use other than that indicated is absolutely forbidden.
More specifically, for a correct use of the equipment, users must note that the following is
forbidden:
o lifting heavier loads than indicated on the ID plate;
o transporting people;
o lifting the load when people are passing in the surrounding area;
o submitting the array to swinging or lifts that are not smooth; i.e. carried out with
“jerks”;
o allowing the rigging equipment to be used by unqualified or insufficiently trained
staff;
o lifting elements fixed to the ground or to other elements that are not part of the
array;
o leaving the suspended load unattended;
o using the rigging frame if is not fitted with the appropriate ID plate;
o hitting adjacent structures with the load;
o making abrupt changes of direction;
o carrying out modifications to the frame, its accessories or any other element of the
array;
o carrying out welding or repairs and/or connect other accessories to the elements of
the structure or to the frame;
o subjecting the structure to corrosive vapours and/or liquids;
o subjecting the structure to temperatures of over 100°C;
o subjecting the structure to a saline and/or aggressive environments;
o carrying out maintenance work on the structure without having removed it from
service;
o having maintenance work carried out by incompetent staff.
3 DESCRIPTION OF THE “GTO” ELEMENT
(LOUDSPEAKER ENCLOSURE)
Every “GTO” loudspeaker enclosure has integrated hardware that enables it to be
connected to the frame (only on the top) and other “GTO” element, forming an array of a
maximum of twenty-four elements.
To Next Page
Loading...