EasyManua.ls Logo

Overhead door Destiny 1200 - User Manual

Overhead door Destiny 1200
32 pages
Save Page as PDF
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
INSTALLER: LEAVE THIS MANUAL WITH HOMEOWNER
HOMEOWNER: SAVE THIS MANUAL FOR FUTURE REFERENCE
PROGRAMMING, OPERATION
& MAINTENANCE MANUAL
Includes factory programmed CodeDodger
®
Remote Control.
The included
Safe-T-Beam® system
MUST be installed to close the door. DO NOT use other brands or types.
Homelink® and Car2U® compatible.
For use ONLY with residential Sectional or One-Piece overhead garage doors.
39496503493
Serial Number Decal
Alternate language manuals available at:
Idioma alternativo manuales disponibles en:
Autre langue manuels disponibles à:
www.OverheadDoor.com
STOP
Need help or have questions?
For answers and assistance,
visit www.OverheadDoor.com
or call Overhead Door at 800-929-3667
To reduce the risk of injury to persons or damage to property - use this opener only with a sectional or one-piece
residential door.
WARNING
!
Pour réduire le risque de blessures ou de dommages matériels, utilisez cet ouvre-porte uniquement pour une porte
à section ou monopièce.
AVERTISSEMENT
!
Destiny® 1500, Destiny®1200
Odyssey® 1200, Odyssey® 1000
BELT/CHAIN/SCREW DRIVE
Within these pages you may see a QR
code for certain steps. Scan this code
to go to the video page and scroll to the
particular programming step. All of these
operators program in the same manner
regardless of model. Download a Code
Reader app from your app store.

Questions and Answers

  • J
    Jack JohnsonAug 17, 2025
    What to do if my Overhead door Destiny 1200 Garage Door Opener remote has less than 25 feet operating range or no operation?
    • M
      Michael ThompsonAug 17, 2025
      If your Overhead Door Garage Door Opener remote has a short operating range, try these steps: relocate the remote inside your car and point it at the garage door. Replace the remote battery. Reposition the door opener antenna and eliminate possible competing signals like radio interference. Note that LED bulbs may interfere with the remote signal.
  • N
    nicole60Aug 20, 2025
    What to do if my Overhead door Destiny 1200 works from the wall control, but NOT from the remote?
    • P
      Pamela ZimmermanAug 20, 2025
      If your Overhead Door Garage Door Opener operates from the wall control but not the remote, check all remotes, replace the remote battery, and program the remotes to the powerhead.
  • M
    Mary NguyenAug 22, 2025
    How to troubleshoot Overhead door Destiny 1200 Garage Door Opener that does NOT operate when wall control is pressed?
    • G
      Gary SellersAug 22, 2025
      If your Overhead Door Garage Door Opener doesn't respond when the wall control is pressed, first turn Sure-Lock™ OFF. Check the power source by plugging a lamp into the outlet used for the powerhead; if the lamp works, the power source is OK. If not, check the fuse or circuit breaker. If power is OK, check the connections at the powerhead terminals and at the wall console. Look for reversed, broken, or cut wires, as staples can cut insulation and short wires. Repair or replace any damaged wires.
  • R
    Robert SimmonsAug 25, 2025
    What to do if my Overhead door Destiny 1200 Garage Door Opener starts down, then stops and goes back up?
    • M
      Miguel SilvaAug 26, 2025
      If this is a new Overhead Door Garage Door Opener installation, check the door arm position and ensure only the Safe-T-Beams that came with the opener are installed. Also, verify that the limits are properly set. Check if the Safe-T-Beam red LED is flashing, and inspect the Safe-T-Beam system for beam obstruction or misalignment of lenses. Ensure the garage door isn't binding. If an operational problem exists and the opener won't close, you can force it to close by pressing and holding the wall control button until the door is completely closed. Also, check for interference from adjacent Safe-T-Beam units. If problems persist, contact Overhead Door at 1-800-929-3667.
  • E
    Elizabeth ThomasAug 28, 2025
    What to do if my Overhead door Destiny 1200 Garage Door Opener starts down, then stops before it is closed, or only opens?
    • J
      John FitzpatrickAug 28, 2025
      If your Overhead Door Garage Door Opener starts to close but stops before closing completely, or if it only opens, check the Safe-T-Beam wire connections at the powerhead and at the STBs. Also, make sure the limits are properly set and check the contact reverse feature. Ensure that the garage door is not binding, and check the closing force control.
  • N
    nicole27Aug 30, 2025
    Why does my Overhead Door Garage Door Opener start for no reason?
    • L
      Lisa LyonsAug 30, 2025
      If your Overhead Door Garage Door Opener starts unexpectedly, check if the button is stuck on the wall control or remote. If a remote was lost or stolen, erase all remotes from the powerhead memory and program new remotes.
  • J
    Jessica BarrettSep 2, 2025
    What to do if my Overhead door Destiny 1200 Garage Door Opener starts up, but stops before it is completely open?
    • L
      Lisa FuentesSep 2, 2025
      If your Overhead Door Garage Door Opener starts to open but stops before it is fully open, first check if the limits are properly set. Ensure that the door, opener, and springs are in good repair, properly lubricated, and balanced. Also, check the closing/opening force control. If you suspect issues with the garage door hardware or springs, visit www.OverheadDoor.com to find a local door service professional, and never attempt to repair door hardware or springs yourself.
  • L
    Luis MoralesSep 5, 2025
    How to fix noisy operation of Overhead door Destiny 1200?
    • K
      kevinwashingtonSep 5, 2025
      To reduce noise from your Overhead Door Garage Door Opener, ensure all door fasteners are tight. Make sure the garage door is in good repair, properly lubricated, and balanced. Also, ensure the opener itself is in good repair.
  • R
    Robert Wong MDSep 7, 2025
    What to do if my Overhead Door Garage Door Opener will only run closed?
    • B
      Bailey FitzgeraldSep 8, 2025
      If your Overhead Door Garage Door Opener only runs when closing, turn the Sure-Lock feature off. Check if the limits are properly set, and inspect the door balance, condition, and spring. Also, check the opening force control. If you suspect a problem with the garage door hardware or springs, visit www.OverheadDoor.com to find a local door service professional, and never try to repair door hardware or springs yourself.
  • C
    Christopher MackSep 10, 2025
    Why Overhead door Destiny 1200 Garage Door Opener runs slow?
    • Y
      Yvette AdamsSep 12, 2025
      If your Overhead Door Garage Door Opener runs slowly, check the operating condition of the door, as it may need professional repair or adjustment. Also, verify whether the opener is installed on a one-piece door, as this opener is not designed to operate one-piece doors.

Overhead door Destiny 1200 Specifications

General IconGeneral
Wi-Fi ConnectivityYes
Battery BackupOptional
Security FeaturesRolling code technology
Drive SystemBelt
Horsepower1/2 HP
Voltage120V
Motor TypeDC
LightingLED
WarrantyLimited lifetime on motor, 5 years on parts
Remote Controls3-button remote
Drive TypeBelt Drive
Door Compatibility7 ft standard, 8 ft with extension kit

Related product manuals