Overmax CAMSPOT 3.0 User Manual

Start guide
Before using, please read the user manual carefully.
All the contents of the manual are subject to change without prior
notice.
The applications mentioned in this manual are compatible with
CAMSPOT 3.0, CAMSPOT 4.3 and CAMSPOT 4.5.
1. Connect the camera to a power source.
2. Connect the camera to a router using the LAN cable.
3. After the calibration the camera is available online. You can use a
smartphone, a tablet or a computer to connect with the camera.
NOTE:
 The first camera configuration should be carried out using a LAN
cable.
 During the process, both devices must be connected to the same
network.
 In order to avoid damage to the device always use the included power
supply.
 The label with QR code, identification number (ID) and password is
located at the bottom of the product.

Overmax CAMSPOT 3.0 Specifications

General

Brand	Overmax
Model	CAMSPOT 3.0
Category	Security Camera
Language	English

Summary

Start Guide

Initial Camera Connection Setup

Connect the camera to power and router via LAN cable for initial setup.

Camera Identification Details

Provides username, password, device ID (DID), and DDNS for accessing the camera.

Android Device Configuration and Operation

CamSpotView App Installation and Camera Addition

Download, install the CamSpotView app and add the camera using ID or search.

Android Camera Operation and Wi-Fi Setup

Access live view, operate the camera, and configure Wi-Fi connection via the app.

iOS Device Configuration and Operation

iSmartViewPro App Installation and Camera Addition

Download, install the iSmartViewPro app and add the camera using QR code or search.

iOS Camera Operation and Wi-Fi Setup

Access live view, operate the camera, and configure Wi-Fi connection via the app.

PC Configuration and Operation

SearchPro Tool Installation and Connection

Download and run the SearchPro Tool to connect and manage the camera on a PC.

PC Camera Operation and Wi-Fi Setup

Access live view, settings, and configure Wi-Fi connection via web browser or tool.

Declaration of Conformity

Product Details and Model Information

Specifies the product as an IP Camera and lists compatible models.

Applicable Standards and Representative Contact

Lists relevant technical standards and identifies the official representative.