Need help?Do you have a question about the Overmax CAMSPOT 4.5 and is the answer not in the manual?
General| Field of View | 90 degrees |
|---|---|
| Storage | microSD card up to 128GB |
| Audio | Two-way audio |
| Ingress Protection | IP66 |
| Lens | 3.6mm |
| Operating Temperature | -20°C to 50°C |
| Housing | Metal |
| Resolution | 1920x1080 px |
| Night Vision | Yes |
| Connectivity | Wi-Fi |
| IR Range | 10 m |
Download, install, and run the Search Pro tool to locate connected cameras on the network.
Click the camera's IP address in the tool to open it in a web browser and select video mode.
Access Network settings, select WiFi, search for networks, choose your SSID, and enter the password.
Save WiFi settings, disconnect the Ethernet cable, and wait for the camera to connect wirelessly.
Configure SMTP server, port, and credentials for sending email notifications upon motion detection.
Configure FTP server, username, and password to upload captured files automatically.
Define detection zones and adjust sensitivity levels for motion detection events.
To Next Page
