Start guide
Before using, please read the user manual carefully.
All the contents of the manual are subject to change without prior
notice.
The applications mentioned in this manual are compatible with
CAMSPOT 3.0, CAMSPOT 4.3 and CAMSPOT 4.5.
1. Connect the camera to a power source.
2. Connect the camera to a router using the LAN cable.
3. After the calibration the camera is available online. You can use a
smartphone, a tablet or a computer to connect with the camera.
NOTE:
The first camera configuration should be carried out using a LAN
cable.
During the process, both devices must be connected to the same
network.
In order to avoid damage to the device always use the included power
supply.
The label with QR code, identification number (ID) and password is
located at the bottom of the product.
To Next Page
Need help?
General
