This document provides assembly instructions and care guidelines for a Bar Stool/Counter Stool.
Function Description:
The Bar Stool/Counter Stool is a piece of furniture designed for seating at a bar or counter height. It features a backrest, a cushioned seat, a swivel plate for rotation, wooden legs, and a leg frame for stability. The assembly process involves attaching these components using various bolts, washers, and an Allen key.
Important Technical Specifications:
The hardware required for assembly includes:
- Bolts:
- M6 x 40mm (10 pieces)
- M6 x 35mm (8 pieces)
- M6 x 25mm (4 pieces)
- Washers:
- Spring Washer M6 x 13mm (18 pieces)
- Flat Washer M6 x 13mm (12 pieces)
- Flat Washer M6 x 16mm (10 pieces)
- Tool: Allen Key (1 piece)
The main components are:
- A: Backrest (1 piece)
- B: Wooden Leg (4 pieces)
- C: Leg Frame (1 piece)
- D: Swivel Plate (1 piece)
- E: Cushion Seat (1 piece)
Usage Features:
- Assembly: The assembly process is estimated to take up to 30 minutes and requires two adults. It is crucial to read all instructions before beginning.
- Stability Check (Drop Test): After assembly, the stool must be placed on a level surface to check for wobbles. If wobbles are detected, the stool should be lifted 30-50 cm from the ground, and then dropped freely and vertically, ensuring all four legs hit the ground simultaneously. This "Drop Test" helps ensure all bolts and gaps achieve full alignment. The test should be repeated until no wobbles are found.
- Tightening Bolts: Bolts should be tightened sequentially. It is explicitly warned not to fully tighten Pack A and Pack B bolts during Step 2 and Step 3 initially, as this could warp the frame. Full tightening should only occur after the drop test confirms stability. Over-tightening can damage the product.
- Level Surface Use: The Bar Stool/Counter Stool can only be used on a flat, level surface to ensure stability and prevent accidents.
- Long-term Use: Over time, the joints of the stool may become loose. Users should periodically use the Allen Key to tighten all bolts to maintain stability.
Maintenance Features:
- Cleaning:
- Do not put hot items directly on the furniture surface.
- Do not clean furniture with harsh cleansers or polish.
- Do not place furniture under direct sunlight.
- Do not place furniture near heating or cooling vents.
- Do not write on furniture without a padded barrier to protect the surface.
- Do not place furniture outside. For indoor use only.
- Not for commercial use. For residential use only.
- Stains may be removed with mild soap solution and a damp cloth.
- Children should not climb or jump on the furniture.
- Dust and pick-up spills using a clean, non-colored, lint-free cloth.
- Proposition 65 Warning: This product may contain chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. This warning is provided to comply with California's Proposition 65, which requires businesses to inform consumers about potential exposure to such chemicals. The warning indicates that the product contains one or more chemicals on the Proposition 65 list, which includes a wide range of substances found in everyday household items, such as lamps, tableware, jewelry, crystal glasses, electric cords, beauty products, automobiles, and furniture. The presence of this warning does not necessarily mean the product is harmful, but rather that it contains a listed chemical.
Assembly Preparation Guidelines:
- Read Instructions: Always read the instructions thoroughly before starting assembly.
- Two-Person Assembly: Have two adults on hand for assembly.
- Floor Protection: Do not assemble on flooring or carpet directly. Assemble on a clean, non-marring surface (e.g., the packing foam) to prevent scratches or damage to the product and the floor.
- Packaging Disposal: Save all packaging until finished with assembly to ensure all parts are accounted for.
Need help?
General
To Next Page
