Illustration 7: IP67 rear back with cable gland and M12..............................................13
Illustration 8: M12 connector pin-out...........................................................................13
Illustration 9: M12 and cable gland..............................................................................14
Illustration 10: Developers board physical description.................................................15
Illustration 11: Developers board schematic................................................................16
Illustration 12: Insertion of BAT118 6500.....................................................................23
Illustration 13: Insertion of BAT 418 6500....................................................................24
Illustration 14: USB pinout...........................................................................................24
Illustration 15: Main connector....................................................................................25
Illustration 16: Digital output typical loads...................................................................28
Illustration 17: owa4x RS485 bus................................................................................29
Illustration 18: RJ45 connector....................................................................................32
Illustration 19: Accelerometer axis...............................................................................34
Illustration 20: IP67 cover with Ethernet option...........................................................35
Illustration 21: Accelerometer / Gyroscope axis...........................................................35
Illustration 22: owa4x dimensions...............................................................................52
Illustration 23: Opening process..................................................................................54
Illustration 24: Installation brackets measurements.....................................................55