OWC Mercury Elite Pro Dual User Guide

OWC MERCURY ELITE PRO DUAL
INTRODUCTION
1
1.1.3 Supported Hard Drives
•Any 3.5” SATA hard drive
1.2 PACKAGE CONTENTS
INTRODUCTION
1.3 ABOUT THIS MANUAL
Firmware, images, and descriptions may vary slightly between this manual and the unit
shipped. Functions and features may change depending on the firmware version. Please
visit the product webpage for the most recent specifications.
1.1.1 Mac® Requirements
•PowerPC G4 CPU, 128MB RAM
•eSATA: Mac OS X 10.3 or later
•FireWire: Mac OS X 10.2 or later
•USB 2.0: Mac OS X 10.2 or later
1.1.2 PC Requirements
•500MHz Intel Pentium 3 CPU, 128MB RAM
•eSATA: Windows XP or later
•FireWire: Windows 2000/XP or later
•USB 2.0: Windows 2000/XP or later
1.1 MINIMUM SYSTEM REQUIREMENTS
Mercury Elite Pro
Dual
Power Supply and
cable
eSATA cable
FireWire 800 (1394b)
9-9 pin cable
FireWire 400 (1394a)
6-6 pin cable
USB 2.0 (Standard-A
to Standard-B) cable

OWC Mercury Elite Pro Dual Specifications

General

Hot-swap	Yes
RAID levels	0, 1
Storage drive size	3.5 \
Total storage capacity	8000 GB
Number of storage drives supported	2
Interface	Thunderbolt
Product color	Aluminum
Storage temperature (T-T)	-40 - 65 °C
Operating temperature (T-T)	5 - 42 °C
Storage relative humidity (H-H)	5 - 95 %
Operating relative humidity (H-H)	8 - 90 %
Cache internal	128 MB

Weight and Dimensions

Depth	228.6 mm
Width	71.2 mm
Height	133.4 mm