OWC Mercury Elite Pro Assembly Manual & User Guide

OWC MERCURY ELITE PRO
DEVICE SETUP
4
3. When removed from the outer case, the inner chassis will appear as shown below. Remove
the packet of screws and use them as directed later in the assembly instructions.
2. Once the two screws are removed, slide the inner chassis out the front of the outer case,
as shown below. Start by pushing on the back of the inner chassis, then when you are able
to grip the front grill of the inner chassis, pull it out the rest of the way.
.

OWC Mercury Elite Pro Specifications

General

Number of storage drives supported	1
FireWire 800	Yes
Product color	Aluminum
Data transfer rate	5 Gbit/s
Cables included	AC, eSATA, FireWire, USB