OWC Mercury Elite Pro Assembly Manual & User Guide

OWC MERCURY ELITE PRO
DEVICE SETUP
6
6. Slide the inner chassis back into the outer case, as shown below.
7. Once the front grill of the inner chassis sits flush with the edge of the outer case, turn the
Mercury Elite Pro on its side. Use the two smaller screws you removed in Step 1, and re-
fasten the outer case to the inner chassis.
This completes the assembly process.
.

OWC Mercury Elite Pro Specifications

General

Number of storage drives supported	1
FireWire 800	Yes
Product color	Aluminum
Data transfer rate	5 Gbit/s
Cables included	AC, eSATA, FireWire, USB