OWC USB-C Travel Dock Device Setup
3
DEVICE SETUP
2.1 Usage Notes
- To install the optional driver for use with Apple Super Drive, Apple USB Keyboard, and charging of 1/2/3
generation iPads, please install the OWC Dock Ejector app.
- Power port - In most scenarios the dock will draw 8W from its power source. When connected to a power
adapter, the dock will draw power from the adapter instead of bus-powering from the host computer.
- If the media reader or USB peripherals connected to the dock do not perform as expected, connect
the dock to a dedicated USB-C power adapter.
- Depending on the adapter connected, the dock can pass up to 92W to the host computer.
- Any power not used by the dock and its ports, is passed to the host for battery charging,
if applicable.
- Please note that while both of the USB ports on the USB-C Travel Dock (2019 edition) can
support ‘high power’ bus-powered USB devices with the appropriate cable type, such as the
OWC Envoy Pro EX or the Apple Super Drive, it is not possible to connect two high-power,
bus-powered USB devices the same time, unless you have a dedicated power adapter connected
to the dock’s USB-C Power Delivery port.
To Next Page
Loading...
Need help?
General
