6
Reset Button
• Reset. Press and hold the reset button for 5 seconds until the LED
indicator flashes Red 3 times quikly to clear the Wi-Fi information
(energy data will not be cleared). After that, the LED indicator will blink
Green and wait for pairing.
Note: If you want to clear the energy data, please delete the device and
wipe data on the app then add it again.
LED indicator
The LED status gives the following information of the power clamp:
LED Status What it means
Green LED blinking Wait for pairing
Green LED solid on Device has connected with cloud.
Red LED solid on
Device is connected to the router, but
cannot connect to the cloud.
Mounting bracket
To Next Page
Loading...
