Owon PC311-TY - Important Safety Information

7
3
Installaion
Impoant safety information!
• The power clamp must be installed and seiced only by a qualied
electrical personnel.
• Do not touch the terminals of the device during testing.
• Turn o all the power supply for this equipment before installing.
• Make sure that the power supply is off before connecting or
disconnecting it to an auxilia device.
• Always use a properly rated voltage sensing device to con
fi
rm
power is o.
• Replace all devices, doors and covers before applying power to the
equipment.
Failure to follow these instructions will result in death or serious
inju.