Owon XDM1000 Series User Manual

1.Safety Information
2. Quick Start
General Inspection
After you get a new multimeter, it is recommended that you should make a check
on the instrument according to the following steps:
1. Check whether there is any damage caused by transportation.
If it is found that the packaging carton or the foamed plastic protection cushion
has suered serious damage, do not throw it away rst till the complete device
and its accessories succeed in the electrical and mechanical property tests.
2. Check the Accessories
The supplied accessories have been already described in the Appendix A:
Enclosure of this Manual. You can check whether there is any loss of
accessories with reference to this description. If it is found that there is any
accessory lost or damaged, please get in touch with our distributor
responsible for this service or our local oces.
3. Check the Complete Instrument
If it is found that there is damage to the appearance of the instrument, or the
instrument cannot work normally, or fails in the performance test, please get
in touch with our distributor responsible for this business or our local oces. If
there is damage to the instrument caused by the transportation, please keep
the package. With the transportation department or our distributor responsible
for this business informed about it, a repairing or replacement of the
instrument will be arranged by us.
Dimensions
200 mm
6
All manuals and user guides at all-guides.com

Owon XDM1000 Series Specifications

General

Brand	Owon
Model	XDM1000 Series
Category	Multimeter
Language	English