1. Safety Information
Safety Terms and Symbols
Safety Terms
Terms in this Manual. The following terms may appear in this manual:
Warning: Warning indicates the conditions or practices that could result in
injury or loss of life.
Caution: Caution indicates the conditions or practices that could result in
damage to this product or other property.
Terms on the Product. The following terms may appear on this product:
Danger: It indicates an injury or hazard may immediately happen.
Warning: It indicates an injury or hazard may be accessible potentially.
Caution: It indicates a potential damage to the instrument or other property might occur.
Safety Symbols
Symbols on the Product. The following symbol may appear on the product:
Warning, risk of electric shock
Caution, risk of danger (refer to this
manual for specific Warning or
Caution information)
Both direct and
alternating current
Conforms to European Union
directives
IEC Measurement Category I. The maximum measurable voltage
is 1000 Vpk in the HI -LO terminal.
IEC Measurement Category II. Inputs may be connected to AC
mains power (up to 600 VAC) under Category II overvoltage
conditions.
This product complies with the WEEE Directive (2012/19/EC)
marking equipment. The affixed product label indicates that you
must not discard this electrical/electronic product in
domestic household waste.
To Next Page
Loading...
