Owon XDM1141 - Power on

2.Quick Start
9
Figure 2-3 User interface
Secondary function
Primary function reading
Figure 2-4 User interface (Dual display)
Power On
(1) Connect the instrument to the AC supply using the supplied power cord.
Warning:
To avoid electric shock, the instrument must be grounded properly.
When using an adapter for power supply, it is recommended to use a
grounded adapter, otherwise it may have a certain impact on the
measurement.
(2) Press down the power button at the front panel, the screen shows the boot screen.
Trigger Mode
Status Icon
Display
Description
Trigger
Auto trigger
Icon
Description
Auto record function is running
Manual record