3.Quick Start
waveform sampling.
Autoset: Click the on the left top of the display area to auto set.
Select a menu item: Touch the menu items in the bottom menu, or in the right menu,
or in the left menu.
Switch menu items: If there are options that can be switched on the menu, you can
repeatedly touch the area of the menu item to switch, or push the corresponding
button to switch. See figure below:
Press repeatedly to
switch the options
Adjust value on the menu item:
Click to increase the
value of cursor position
Move the cursor
Click to decrease the
value of cursor position
Click to show the
soft keyboard
Scroll the list: If there is a scroll bar in the left menu or in the file system window,
you can swipe up and down to scroll the list.
Touchable menu pane: Click the
icon on the right bottom of the display area, a
shortcut menu will be shown. Click to enter the corresponding function menu.
Turn off the function
Enter the function
menu
Next page
Set the channel status: Click the channel on the left bottom of the display area, you
can turn on, select or turn off the channel. You can also touch the channel pointer on
the left side of the display area to make it in selected state.
To Next Page
Loading...
