Need help?Do you have a question about the Owon HDS2202S and is the answer not in the manual?
General| Bandwidth | 200 MHz |
|---|---|
| Channels | 2 |
| Vertical Sensitivity | 2 mV/div to 10 V/div |
| Multimeter | Yes |
| DMM Voltage DC | 600 V |
| DMM Voltage AC | 600 V |
| DMM Current DC | 10 A |
| DMM Current AC | 10 A |
| Max Input Voltage | 400 V (DC + AC Peak) |
| Display | 7 inch TFT LCD |
| Battery | 7.4V |
| Connectivity | USB, LAN |
| Vertical Resolution | 8 bits |
| Power Supply | 100-240V AC, 50/60Hz |
| Input Impedance | 1 MΩ ±2% |
| Input Coupling | DC, AC, GND |
| Trigger Types | Edge, Pulse |
| Sample Rate | 1 GS/s |
Defines terms like Warning and Caution used in the manual for safety.
Explains symbols like Hazardous Voltage and Protective Earth Terminal.
Identifies and explains the functions of the front panel buttons.
Explains the various elements and indicators displayed on the oscilloscope screen.
Details how to set the probe's attenuation coefficient for correct scaling.
Explains the meaning of various indicators and readouts on the multimeter display.
To Next Page
