Need help?Do you have a question about the Owon HDS272 and is the answer not in the manual?
General| Bandwidth | 70 MHz |
|---|---|
| Sample Rate | 1 GSa/s |
| Channels | 2 |
| Multimeter | Yes |
| Display Type | TFT LCD |
| Input Voltage Range | 400 V (DC + AC peak) |
| Trigger Modes | Edge, Pulse, Video, Slope |
| Battery | Rechargeable lithium-ion battery |
| Vertical Sensitivity | 10 V/div |
| Input Impedance | 1 MΩ ± 2% |
| Interface | USB |
| Power Supply | AC 100V-240V, 50/60Hz |
| Display | 7-inch |
Outlines precautions to prevent personal injury and product damage.
Details the functions of buttons and connectors on the front panel.
Explains the elements and indicators displayed on the oscilloscope screen.
Procedure to adjust probes for accurate measurements by matching them to input channels.
Safety guidelines for handling probes to prevent electric shock.
Controls and settings for adjusting the vertical scale and position of waveforms.
Controls and settings for adjusting the horizontal scale and trigger position.
Tools for automatic and cursor-based waveform measurements.
Configures and displays automatic measurements like frequency and amplitude.
Enables manual measurement of waveforms using cursors.
Defines how the oscilloscope starts acquiring and displaying waveforms based on trigger conditions.
Detailed technical characteristics of the oscilloscope, including bandwidth, sampling, and input.
To Next Page
