Need help?Do you have a question about the Owon HDS242S and is the answer not in the manual?
General| Bandwidth | 40 MHz |
|---|---|
| Channels | 2 |
| Sample Rate | 1 GSa/s |
| Weight | 2.5 kg |
| Multimeter | Yes |
| Input Impedance | 1 MΩ |
| Display | 7 inch TFT LCD |
| Vertical Resolution | 8 bit |
| Vertical Sensitivity | 10 mV - 10 V/div |
| Timebase Range | 5 ns/div |
| DMM Current Range | 10 A DC/AC |
| DMM Resistance Range | 60 MΩ |
| Power Supply | AC 100-240 V |
| Connectivity | USB, LAN |
| Trigger Types | Edge, Pulse, Video |
| Interface | USB, LAN |
| Input Voltage Range | 400V (DC+AC, PK-PK) |
Overview of the oscilloscope's physical layout and major components.
Details the controls, buttons, and connectors on the front of the oscilloscope.
Explains the display elements, indicators, and their meanings on the oscilloscope screen.
Outlines the steps for a quick operational check to verify instrument functionality.
Guides on adjusting the oscilloscope probe for accurate measurements.
Details how to adjust vertical scale, position, and other channel settings.
Explains how to set the time base, horizontal scale, and trigger position.
Covers automatic and cursor-based measurements available on the oscilloscope.
Explains how to set up triggers for stable waveform acquisition.
To Next Page
