Need help?Do you have a question about the Owon HDS242 and is the answer not in the manual?
General| Channels | 2 |
|---|---|
| Bandwidth | 40 MHz |
| Sample Rate | 250 MSa/s |
| Multimeter Function | Yes |
| DMM Voltage DC | 600 V |
| DMM Voltage AC | 600 V |
| DMM Current DC | 10 A |
| DMM Current AC | 10 A |
| DMM Resistance | 40 MΩ |
| DMM Diode Test | Yes |
| DMM Continuity Test | Yes |
| Interface | USB |
| Weight | 1.5 kg |
| Battery | Lithium battery |
| Vertical Resolution | 8 bit |
| DMM Capacitance | 100 μF |
| Power Supply | 100-240 V AC, 50/60 Hz |
| Memory Depth | 8 kpts |
General precautions to avoid hazards and damage to the instrument.
Details the buttons and connectors on the front panel.
Explains the graphical elements and indicators on the display.
Adjusting probes for accurate measurements and setting attenuation.
Using the instrument for automatic measurement of signal parameters.
Utilizing cursors for precise measurement of waveforms.
Setting up trigger source, coupling, type, and level.
Solutions for issues like not turning on or shutting down.
Addressing problems with measurement values and waveform stability.
Resolving trigger malfunctions and slow display speeds.
Details on bandwidth, sampling, input, and vertical/horizontal characteristics.
To Next Page
