Need help?Do you have a question about the Owon HDS272S and is the answer not in the manual?
General| Model | HDS272S |
|---|---|
| Channels | 2 |
| Bandwidth | 70 MHz |
| Multimeter Functions | Yes |
| Vertical Resolution | 8 bits |
| Vertical Sensitivity | 2 mV/div to 10 V/div |
| DMM Diode Test | Yes |
| DMM Continuity Test | Yes |
| Weight | 1.5 kg |
| Category | Digital Oscilloscope and Multimeter |
| Sample Rate | 1 GS/s |
| Battery | 7.4V |
| USB Interface | USB |
| Multimeter | Yes |
| DMM Current DC | 10 A |
| DMM Current AC | 10 A |
| Power Supply | AC adapter or battery |
| Interface | USB, LAN |
| DMM Voltage DC | 600 V |
| DMM Voltage AC | 600 V |
| DMM Capacitance | 60 nF to 60 mF |
Explains warning terms, danger levels, and safety symbols used in the manual.
Outlines essential safety precautions for operating the instrument.
Guide on inspecting the instrument for damage and completeness before use.
Introduction to the physical components and layout of the oscilloscope.
Detailed explanation of the buttons, knobs, and display on the front panel.
Description of connectors and features located on the sides of the oscilloscope.
How to navigate and understand the on-screen display and menus.
Steps to perform a basic operational check of the oscilloscope.
Procedure for calibrating probes to ensure accurate waveform measurements.
How to set the probe's attenuation factor for correct vertical scaling.
Essential guidelines for safely using oscilloscope probes to avoid electrical hazards.
How to adjust vertical scale, position, and coupling for signal display.
How to adjust time base, position, and trigger sweep.
Details on automatic measurements and cursor measurements for waveform analysis.
How to set up triggers for stable and accurate waveform capture.
Introduction to the multimeter capabilities and basic operations.
Explanation of input terminals, display, and measurement modes.
Steps for connecting the waveform generator's output port to external devices.
How to select and set parameters for desired waveforms.
How to configure the load impedance for the waveform generator output.
Detailed settings for generating a sine wave output.
Detailed settings for generating a square wave output.
Detailed settings for generating a ramp wave output.
Detailed settings for generating a pulse wave output.
Detailed settings for generating custom arbitrary waveforms.
Instructions for establishing a USB connection between the oscilloscope and a computer.
Troubleshooting steps for common problems like power, display, or measurement errors.
Detailed performance characteristics, bandwidth, sampling rate, and input specifications.
Detailed specifications for multimeter functions like voltage, current, resistance, and capacitance.
Technical details for the optional waveform generator's frequency, amplitude, and output.
Specifications related to display, power, environment, and mechanical build.
A comprehensive list of all items provided in the product package.
Guidelines for proper care, cleaning, and battery management of the instrument.
To Next Page
