Need help?Do you have a question about the Owon SDS6062 and is the answer not in the manual?
General| Bandwidth | 60 MHz |
|---|---|
| Channels | 2 |
| Sample Rate | 1 GSa/s |
| Max Input Voltage | 400V (DC + AC Peak) |
| Vertical Resolution | 8 bit |
| Timebase Range | 5 ns/div to 50 s/div |
| Trigger Modes | Edge, Pulse, Video, Slope, Alternate |
| Input Impedance | 1 MΩ ± 2% |
| Interface | USB Host, USB Device |
| Record Length | 10K |
| Display | 7 inch TFT LCD |
Guides through the initial checks of the instrument before use.
Details the adjustment process to match probes with input channels for accurate measurements.
Provides essential safety guidelines for using oscilloscope probes to prevent electric shock.
Describes the self-calibration procedure to ensure optimal measurement accuracy.
Guides on adjusting vertical settings like Coupling, Inverted, Probe, and Limit for channels.
Explains how to configure trigger controls for stable waveform acquisition.
Guides on saving and recalling waveforms and oscilloscope settings.
Guides on using automatic measurement functions for voltage and time parameters.
Guides on using cursors for precise voltage and time measurements on waveforms.
Explains how to automatically set up trigger, voltage, and time scales for signals.
To Next Page
