Need help?Do you have a question about the Owon SDS1102 and is the answer not in the manual?
General| Bandwidth | 100 MHz |
|---|---|
| Sample Rate | 1 GS/s |
| Channels | 2 |
| Vertical Sensitivity | 2 mV/div to 10 V/div |
| Connectivity | USB Host, USB Device |
| Trigger Types | Edge, Pulse, Video, Slope, Alternate |
| Math Functions | +, -, *, /, FFT |
| Power Supply | 100-240VAC, 50/60Hz |
| Weight | 2.5 kg |
| Display | 7-inch TFT LCD |
| Vertical Resolution | 8 bit |
| Interface | USB, LAN |
| Input Impedance | 1 MΩ ±2% |
Safety precautions to prevent fire or personal injury during operation.
Overview of oscilloscope structure, panels, controls, and user interface elements.
Covers general inspection, function check, probe setup, compensation, safety, and self-calibration.
Introduces vertical, horizontal, and trigger system controls and their functions.
Solutions for power-on issues, no display, and signal connection faults.
Addresses unstable waveforms, incorrect amplitude readings, and slow display.
To Next Page
