8.Technical Specifications
Performance Characteristics
Interval(
T) accuracy
(DC - 100MHz)
Single:
±(1 interval time+100 ppm×reading+0.6 ns);
Average>16:
±(1 interval time +100 ppm×reading+0.4 ns)
Vertical system
Vertical Resolution
8 bits (2 channels simultaneously)
~
Displacement
±
V (
mV/div – 100 mV/div)
±50 V (200 mV/div – 5 V/div)
Analog bandwidth
≥10 Hz (at input, AC coupling, -3 dB)
Rise time (at input,
Typical)
DC gain accuracy ±3%
DC accuracy (average)
Delta Volts
between any two averages of
≥16 waveforms acquired with the same
scope setup and ambient conditions (
V):
Measurement
Cursor
△V, △T, △T&△V between cursors,
auto cursor
Automatic
Period, Frequency, Mean, PK-PK, RMS, Max,
Min, Top, Base, Amplitude, Overshoot,
Preshoot, Rise Time, Fall Time, +Pulse
Width, -Pulse Width, +Duty Cycle, -
Cycle, Delay A→B , Delay A→B
, Cycle
RMS, Cursor RMS, Screen Duty, Phase,
+Pulse Count, -Pulse Count, Rise Edge Count,
Fall Edge Count, Area, and Cycle Area.
Waveform Math
+, -, *, / ,FFT
Waveform storage 16 waveforms
Lissajous
figure
Phase
difference
±3 degrees
USB 2.0 (USB storage)