Need help?Do you have a question about the Owon SDS7102V and is the answer not in the manual?
General| Bandwidth | 100 MHz |
|---|---|
| Sample Rate | 1 GSa/s |
| Channels | 2 |
| Vertical Sensitivity | 2 mV/div to 10 V/div |
| Vertical Resolution | 8 bit |
| Timebase Range | 5 ns/div to 50 s/div |
| Display Resolution | 800 x 480 |
| Math Functions | +, -, *, /, FFT |
| FFT Window | Hanning, Hamming, Blackman, Rectangular |
| Weight | 2.5 kg |
| Trigger Modes | Edge, Pulse, Video, Slope, Alternate |
| Connectivity | USB |
| Power Supply | AC 100V-240V, 50/60Hz |
| Display | 7-inch TFT LCD, 800x480 resolution |
| Input Impedance | 1 MΩ ±2%, 15 pF ±3 pF |
Details the controls and indicators on the front of the SDS series oscilloscope.
Explains the function and operation of the various buttons and knobs for controlling the oscilloscope.
Provides a guide to understanding the various elements displayed on the oscilloscope's screen.
Guides the user through the process of compensating the oscilloscope probe for accurate measurements.
Provides essential safety guidelines for using the oscilloscope probe to prevent electric shock.
Explains the controls and functions related to adjusting the vertical display of waveforms.
Details the controls and settings for adjusting the horizontal time base and position.
Covers the setup and adjustment of the trigger controls for stable waveform capture.
To Next Page
