3.Quick Start
5
(if there is battery inside DSO)
L
ight off: Only powered by battery without connecting AC Power
4. Control (key and knob) area
5. Probe Compensation: Measurement signal (5V/1KHz) output. (The signal parameters
could be adjusted in SDS7072(V))
6. EXT Trigger Input
7. Signal Input Channel
8. Menu off
Left Side Panel
Figure 3-2 Left side panel
1. Power switch: "―" represents power ON; "○" represents power OFF.
2. AC power input jack
Right Side Panel
Figure 3-3 Right side panel
1. USB Host port: It is used to transfer data when external USB equipment connects to
Test Equipment Depot - 800.517.8431 - 99 Washington Street Melrose, MA 02176
TestEquipmentDepot.com
To Next Page
Loading...
