Need help?Do you have a question about the Owon HDS2102S and is the answer not in the manual?
General| Brand | Owon |
|---|---|
| Model | HDS2102S |
| Category | Test Equipment |
| Language | English |
Identifies the layout and function of buttons and connectors on the front panel figure.
Details the purpose and operation of all keys and connectors on the front panel.
Explains the various indicators and information displayed on the oscilloscope screen.
Step-by-step guide to adjust probe compensation for accurate measurements.
How to configure the probe's attenuation factor within the oscilloscope settings.
Safety guidelines for handling and using oscilloscope probes to prevent shock.
Explains how to set the voltage scale per division for different probe attenuations.
How to enable and configure automatic measurements like frequency, amplitude, etc.
Using cursors to perform manual measurements of voltage and time.
Explains how triggers control waveform acquisition and details menu options.
How to set the trigger level and adjust it using specific keys.
Restoring factory defaults and performing automatic calibration.
Solutions for the instrument not turning on or turning off unexpectedly.
Addressing multimeter display errors and unstable or missing waveforms.
Troubleshooting trigger settings, display speed, and RUN/STOP functionality.
Bandwidth, sampling, input, horizontal, and vertical specifications.
Specs for cursor, automatic measurements, and trigger system.
To Next Page
