Need help?Do you have a question about the Owon VDS1022(I) and is the answer not in the manual?
General| Bandwidth | 25 MHz |
|---|---|
| Sample Rate | 100 MS/s |
| Channels | 2 |
| Connectivity | USB |
| Trigger Modes | Edge, Pulse, Video |
| Interface | USB |
| Input Coupling | AC, DC, GND |
| Vertical Resolution | 8 bit |
| Power | Via USB |
| Input Impedance | 1 MΩ |
| Operating System Compatibility | Windows |
| Vertical Sensitivity | 5mV/div ~ 5V/div |
Step-by-step guide for installing the USB driver on Windows Vista and 7.
Step-by-step guide for installing the USB driver on Windows XP and 2000.
Guides on setting probe attenuation for accurate measurements.
How to configure vertical parameters like voltage division and position.
How to configure horizontal parameters like time base and position.
Instructions for setting up the trigger system to capture waveforms.
How to turn channels on/off, invert, set coupling, and adjust probe rate.
How to use the oscilloscope's auto-measurement features.
Details the bandwidth and number of channels for different models.
Specifications for acquisition modes and real-time sample rates.
Specifications for input coupling, impedance, voltage limits, and isolation.
Detailed specifications for various trigger modes and conditions.
To Next Page
