Owon XDS3204AE - DMM Menu; DMM Information Window

5.Use the Multimeter (Optional)
25
DMM Menu
Push the DMM button on the front panel to enter/exit the multimeter function. The button
backlight will be lighted when the multimeter function is enabled.
Figure 5-2 Multimeter Button
The bottom menu of multimeter is as below:
Menu
Setting
Description
Current
ACA
DCA
Measuring AC current
Measuring DC current
Voltage
ACV
DCV
Measuring AC voltage
Measuring DC voltage
R
C
Measuring resistance
Testing diode
Testing for continuity
Measuring capacitance
Hold
ON OFF
Freeze the display during measurement.
Configure
Relative
When making relative measurements, reading is the
difference between a stored reference value and the
input signal.
Show Info
ON OFF
Show/Hide the information window
Auto Range
Select auto range mode
Switch Range
Select manual range mode, press to switch range
Current
mA 10A
(Only for current
measurement)
Select the current range.
DMM Information Window
The Multimeter Information Window is displayed on the top right of the screen.