OXTS RT - Software Configuration; Revision History

Oxford Technical Solutions Ltd www.oxts.com Page 10 of 10
Software configuration:
Only the Orientation, GNSS antenna position, and Displaced output need to be changed. Please
see the RT-Range manual for all other settings. A summary of the required changes can be seen in
Table 3.
Table 3. RT Configuration on the Survey Trolley Changes
Parameter
Setting
Orientation
Default settings: y-axis left; z-axis down
Primary Antenna
Behind 0.090; left 0.080; above 1.480; overall accuracy 0.01
Displaced Output
Ahead 0.26; right 0.09; below 0.12
Revision history
Table 4. Revision history
Revision
Comments
210429
Initial version