Ozito LTM-3000 User Manual

LAMINATE
TRIMMER
350W
INSTRUCTION MANUAL
SPECIFICATIONS
Voltage: 230-240V ~ 50Hz
Power: 350W
No Load Speed: 30,000/min
Collet Size: 6.35mm (1/4”)
Weight: 1.7kg
LTM-3000
STANDARD EQUIPMENT
Laminate Trimmer
Trimming Guide
Straight Fence
Template Guide
Collet Spanners
ozito.com.au
IN ORDER TO MAKE A CLAIM UNDER THIS
WARRANTY YOU MUST RETURN THE PRODUCT
TO YOUR NEAREST BUNNINGS WAREHOUSE WITH
YOUR BUNNINGS REGISTER RECEIPT. PRIOR TO
RETURNING YOUR PRODUCT FOR WARRANTY
PLEASE TELEPHONE OUR CUSTOMER SERVICE
HELPLINE:
Australia 1800 069 486
New Zealand 0508 069 486
3 YEAR REPLACEMENT WARRANTY
Your product is guaranteed for a period of 36 months from
the original date of purchase and is intended for DIY (Do It
Yourself) use only. If a product is defective it will be replaced in
accordance with the terms of this warranty. Warranty excludes
consumable parts, for example: carbon brushes, spanners etc
WARNING
The following actions will result in the warranty being void.
• If the tool has been operated on a supply voltage other
than that specified on the tool.
• If the tool shows signs of damage or defects caused
by or resulting from abuse, accidents or alterations.
• Failure to perform maintenance as set out within the
instruction manual.
• If the tool is disassembled or tampered with in any way.
• Professional, industrial or high frequency use.
WARRANTY
TO ENSURE A SPEEDY RESPONSE PLEASE
HAVE THE MODEL NUMBER AND DATE OF
PURCHASE AVAILABLE. A CUSTOMER SERVICE
REPRESENTATIVE WILL TAKE YOUR CALL
AND ANSWER ANY QUESTIONS YOU MAY
HAVE RELATING TO THE WARRANTY POLICY
OR PROCEDURE.
OZITO
Australia/New Zealand (Head Office) 1-23 Letcon Drive, Bangholme, Victoria, Australia 3175.
The benefits provided under this warranty are in addition
to other rights and remedies which are available to you at law.
Our goods come with guarantees that cannot be excluded
at law. You are entitled to a replacement or refund for a major
failure and for compensation for any other reasonably foreseeable
loss or damage. You are also entitled to have the goods repaired
or replaced if the goods fail to be of acceptable quality and the
failure does not amount to a major failure.
Generally you will be responsible for all costs associated with
a claim under this warranty, however, where you have suffered
any additional direct loss as a result of a defective product you
may be able to claim such expenses by contacting our customer
service helpline above.
0919

Ozito LTM-3000 Specifications

General

Brand	Ozito
Model	LTM-3000
Category	Laminate Trimmer
Language	English

Summary

WARRANTY

3 YEAR REPLACEMENT WARRANTY

Details the 3-year replacement warranty terms and conditions.

KNOW YOUR PRODUCT

LAMINATE TRIMMER

Identifies the main components and parts of the laminate trimmer.

ACCESSORIES

Lists and describes the included accessories for the laminate trimmer.

SETUP & PREPARATION

1. SETUP

Guides on how to set up the laminate trimmer, including fitting the base.

CHANGING ROUTER BITS

Removing Router Bits

Step-by-step instructions for removing router bits from the trimmer.

Installing a Router Bit

Step-by-step instructions for installing a new router bit.

TRIMMING GUIDE

Fitting the Trimming Guide

Instructions on how to attach the trimming guide to the trimmer.

Adjusting the Trimming Guide

How to adjust the trimming guide for precise cuts.

STRAIGHT FENCE

Fitting the Straight Fence

Steps to attach the straight fence for linear cutting.

Adjusting the Straight Fence

How to adjust the straight fence for desired cutting distance.

TEMPLATE GUIDE

Fitting the Template Guide

Instructions for attaching the template guide for contour cutting.

OPERATION

6. CONTROLS

Overview of the trimmer's controls and their functions.

Adjusting the Cutting Depth

Steps to adjust the cutting depth of the trimmer.

Switching On and Off

How to turn the laminate trimmer on and off.

MAKING A CUT

Pre-Operation Checks

Key checks to perform before starting the cutting operation.

Cutting and Trimming Guidance

Advice on cutting techniques and chip removal during use.

ROUTER BITS

Straight Bits

Description of straight router bits and their uses for grooves and plunges.

V Groove Bits

Description of V-groove bits used for creating channels and flutes.

Round Over Bits

Description of round over bits for creating rounded edges on workpieces.

Flush Trim Bits

Description of flush trim bits for trimming edges flush with a template.

MAINTENANCE

Carbon Brushes

Explains carbon brush maintenance and replacement procedures.

TROUBLESHOOTING

DESCRIPTION OF SYMBOLS

SPARE PARTS

CARING FOR THE ENVIRONMENT

ELECTRICAL SAFETY

General Electrical Safety Precautions

Essential safety precautions for using mains-powered tools.

Extension Lead Usage

Guidelines for safely using extension leads with power tools.

GENERAL POWER TOOL SAFETY WARNINGS

Work Area Safety

Safety measures related to the work environment.

Electrical Safety

Electrical safety precautions for power tool operation.

Personal Safety

Personal safety measures and protective equipment advice.

Power Tool Use and Care

Guidelines for proper power tool usage and maintenance.

Service and Maintenance

Recommendations for servicing and repair of power tools.

LAMINATE TRIMMER SPECIFIC SAFETY

User Supervision and Control

Specific safety warnings for laminate trimmer users, including supervision.

Extension Lead Safety for Trimmers

Safety advice for using extension leads with the trimmer.