Ozito MACP-015 - 3. INFLATING; Setup; Inflating Tyres

3. INFLATING
IMPORTANT!: AVOID INFLATING THE OBJECTS ABOVE
THE RECOMMENDED INFLATION PRESSURE. THIS MAY
LEAD TO DAMAGE AND/OR INJURIES.
Setup
1 Attach the desired tool to
the quick release coupling
of the air hose.
2 Connect the compressors
power cord to the mains
power supply.
3 To switch ON the
equipment,settheOn/O󰀨
switchtoposition“I”(On).
4 Set the compressor to the
desiredinationpressure,
using the pressure
adjustment dial.
Inating Tyres
1 Attach the tire chuck
to the hose to the
compressed air hose.
2 The tyre chuck included in this kit is
madefor“schrader”valves.
4 Toinatethetyre,holddown
the tyre chuck onto the schrader
valve.
3 Check compressor is set
to the correct pressure.
Pressure can be adjusted
using pressure adjustment
dial.
5 After a short time, release the air
chuck and check the air pressure
with the pressure gauge.