MACP-015
4. BLOWER PISTOL
WARNING!: DO NOT DIRECT THE JET OF
COMPRESSED AIR TOWARDS PEOPLE OR ANIMALS.
Inating other items
The compressor kit is supplied with a variety of adapters that can be
ttedtotherubberhoseorairgun.Theseadaptersaresuitablefor
dierentvalvesthatareoftenusedoninatableitems:
Adapter A is used for footballs, basketballs,
soccer balls etc.
Adapters B&C are used for rubber dinghies,
inatablesmallswimmingpoolsandairbeds.
Adapter D is used for bicycle or car tyres with
“Schrader”valves.
Adapter E is used for blowing air to
clear work spaces of sawdust or other
nematerial.
Attaching ination accessories to the Blow Gun
1 Totthesportsballinatoryou’ll
needtottheincludednozzle
adaptor and screw it into the front
of the blow gun.
2 Once the adaptor is installed
you can then insert the desired
inationnozzle.
3 Once it is inserted, you can then
attach the blow gun to the hose
viathenittottings.
WARNING!: OPERATOR IS ADVISED TO WEAR EYE
PROTECTION WHEN USING THE AIR GUN. TAKE
CARE NOT TO BLOW DIRT OR OTHER LOOSE
PARTICLES TOWARDS YOURSELF OR OTHER PERSONS
Using the Blower Pistol
1 Attachtheblowgunnozzletothe
blow gun.
2 By varying the pressure on the
trigger, you can control the amount
of compressed air released through
theairnozzle.
3 Theblowernozzleadapterisuseful
for blowing dust out of hollow
spaces or hard to reach areas,
such as vents in electrical items or
between the keys of a keyboard.
It is also useful for cleaning soiled
equipment.
A
B,C
D
E